Desktop Telco project

Evan Perry Grove started a telephone switch project based on Arduino-style hardware:

“My goal is to build a telephone switch that’s small enough to fit on my desk, accurate enough to appease dial-up modems up to 33.6k, expandable enough to support sophisticated retro computing projects, and cheap enough to undercut the market for commercial phone line simulators.”

Cool, well PBXes are fairly cheap if you just want to have an interface.
Perhaps some ideas:
If you already have an “Arduino”-style microcontroller. Why not make the actual switching digital. This will save you a lot of headache. Just have a common clock to them, and internally work with a sample rate that is a multiple of 8 kHz. ATMegas easily have enough processing power to do up and downsampling.
Then instead of D/A conversion via PWM, you can use simple R-2R resistor ladders. You will need to use the 0.1% variety though, but 8 bits linear should be feasible. If you run them at a high sample rate, you can do some dithering to get around the quantisation noise issue.

1 Like